2.4Ghz mini remote controller

2.4Ghz mini remote controller
Product Code: RC
Availability: In Stock
Price: $55.00
Ex Tax: $55.00

2 or more $54.00
5 or more $53.00
10 or more $52.00
20 or more $51.00
50 or more $50.00
200 or more $49.00
Qty:     - OR -   Add to Wish List
Add to Compare

2.4Ghz mini remote controller with receiver for electric skateboard

 

Mini Remote Controller 2.4Ghz

 

Weight: 48g

Size:100x52x20mm

Frequency: 2.4G

Channel: 2 channels

Application of ESC: All ESC

Color: Black

Power:Li-po 3.7v 500mAh (build in)

Receiver:included

Wrist strap

Suitable for : Electric skateboard 

 

USB Charge spot (USB core is not included, just standart usb everyone have)

 

pair the reciver and remote instructions:

 

1).Check and make sure all the wires are mounted,and the remote is CLOSED,insert the bind plug into CH3(Bind) on the receiver;
2).Switch on the ESC,you can see the receiver red light flash;
3).Press and hold on the bind button on the remote and then turn the remote on;
4).You should notice the transimitter go from flashing red to solid red,and also the solid red of the receiver;
5).Once you see a solid red light, you now know the two are binded together,and please pull the bind plug out (this is important,so the remote can record the throttle mid to realize the fail safe)
6).Then you can test it again by turning off the controller and it should flash.if you turn the power on Transmitter back on it should go back to solid red.
 
Before running,it's better to test the fail safe fuction by closing the remote,if the motor didn't move,so the fail safe fuction is in good condition,when you find the motor is moving,you have to repeat the step  No.1- No.6 above

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:




Powered By OpenCart
Green Motion © 2018